PTZ Control Remote

Author
 This item can control PTZ cameras without any cables and you don't need an expensive cotrolled keyboard. It's a good and easy way to control your PTZ cameras.It can control 99 pcs cameras by pelco-P/DAdd To Cart

PTZ Control Remote

 This item can control PTZ cameras without any cables and you don't need an expensive cotrolled keyboard. It's a good and easy way to control your PTZ cameras.It can control 99 pcs cameras by pelco-P/D for RS-485,it can replace control keyboard,Installation- Connect 485 ports to PTZ dome 485 cable,

PTZ Control Remote

$99.99
Author

 This item can control PTZ cameras without any cables and you don’t need an expensive cotrolled keyboard. It’s a good and easy way to control your PTZ cameras.It can control 99 pcs cameras by pelco-P/D for RS-485,it can replace control keyboard,Installation- Connect 485 ports to PTZ dome 485 cable,

 This item can control PTZ cameras without any cables and you don’t need an expensive cotrolled keyboard. It’s a good and easy way to control your PTZ cameras.It can control 99 pcs cameras by pelco-P/D for RS-485,it can replace control keyboard,

PTZ Control Remote

Installation

– Connect 485 ports to PTZ dome 485 cable, connect DC12V to power port

– After power is turned on, controller will display A001 or P001

– “A” means address of command, 001 is address number

– “P” means preset point, 001 is preset number

Set Target Camera Address

– Press CAM button go to address command mode

– At this mode, you can input a number by press keyboard numeric key

– If you want input a number more than 10, you need press “-/–” button change to plus 10 mode. You can input 3 number at thsi mode. A

– After enter you need input ENTER button confirm it. Press C button do backspace.

– At any mode, if you press ESC button, system will go to address input mode.

– If you only want to change a address number below 10, you only need press numberic key once.

PTZ Control Remote

Preset Point

– Press SHOT button go to preset selecting mode. It is a command of selecting preset of your target camera.

– At this mode, you can input a number by press num key the preset number is P001.

– If you can input a number more than 10, you need to press -/– button to change to plug 10 node. After ebter, you need to input ENTER button to confirm. Press “C” button for backspace.

– If you want to set a preset number, you need tp press PRSET button for 3 seconds, and the controller will display SET-, at this time you can input a number. I fyou need to input a number of more than 10, you eed to press -/– button before. After input a numner, you need to press ENTER key to confirm.

– Press DELETE button for 3 seconds to clear a preset number.

Package Includes

– 1 x NEW P/T/Z Wireless Keyboard Controller for PTZ camera

Leave a Reply