KHS-122P1 User Manual

Safety Instruction

Thank you for purchasing this HD CCTV Camera. Please read these instructions carefully for a thorough understanding of how the cameras operates.

  • Operating requirements

    • Before using the camera ,please read this manual carefully and keep it

      Safely for later use.

    • Installation should be proceed by professional service and follow manufacturer’s instructions, do not dismantle without authorization.
    • In order to prevent sensor ,do not expose lens to intense light source in

      Long time.

      • Do not touch sensor directly. Please covers the dustproof cover when the camera is not being used.
    • Please use a dry soft cloth to clean the camera. If dirt difficult to clean,

      Use detergent with water and wipe dry the camera.

      • Do not install camera under air conditioning’s air gate, or else lens blur with condensation of moisture.

        • Please ensure that all electric power sources are turned off when not

        Open, installation, clean, etc. operation.

      • Please transporting, using and storing the camera in allowable temperature and humidity.

        • If the camera was broken, for example power cord or plug

        damaged ,splash liquid or foreign matter fall into camera, raining ,wetting ,etc. can’t work situation ,please contact manufacturer or maintenance center (modify and maintenance without permission ,you must be responsible for the problems)

2. Statement

  • All photos here are for reference only .Specifications are subject to

    Physical product.

  • This manual is subject to change without further notice.

    • Please contact with customer service for the newest procedures and supplementary specification.
    • This manual list several model numbers for reference , please user according actual product to operating.
    • We will do the best to keep this manual complete and accurate, but some

      Data may has deviation. If any doubt or dispute, company retain the final right of the product.

NO.

Name

Model

Number

1

Camera

KHS-122P1

1

2

Power line

1

3

Warranty Card

1

HD CCTV CAMERA USER MANUAL

INTRODUCTION:

This camera which has 2.1M Pixels is specially designed for security monitoring. It applies the latest 2.1M Pixels progressive scan CMOS. It is a heavyweight new- designed HD camera which applied DC12V and support user customize the output parameter settings.

Packing List

1    2

Feature

  • ACCE ( Adaptive Color & Contrast Enhancement)
  • NTSC/PAL Selectable
  • DC Lens/ RS485

Specification

Wire ports


Application method

4

Function Menu

OSD MENU

Depending on the brightness of the screen.

► AGC: You can adjust it LOW, MIDDLE and HIGH level. The higher the gain level, the brighter the screen but the higher the

LENS    ■DC    ■VIDEO

Noise.

EXPOSURE    ■SHUTTER

■ATW

■AGC

■DEFOG

■AWC→SET

■SENS-UP

■BACKLIGHT

■MANUAL

■BRIGHTNESS

► SENSE-UP: When it is night, the camera automatically detects the light level and maintains a clear picture.

► BRIGHTNESS: You can control the brightness.

WHITE BAL

■INDOOR

■OUTDOOR

► ACCE: If there are bright area and dark area on the screen at

DAY&NIGHT ■COLOR    ■AUTO    ■EXT    ■B/W

NR    ■2DNR    ■3DNR    ■SMART NR

The same time, this function makes both areas to be in clear image

– OFF, LOW, MIDDLE, and HIGH 4step.

■CAM TITLE

■LANGUAGE

■D-EFFECT

■DEFECT

■MOTION

■RS485

■PRIVACY

► DEFOG: Carry out defog function.

– OFF, LOW, MIDDLE, and HIGH 4step.

ADJUST

■SHARPNESS

■NTSC/PAL

■MONITOR    ■OSD    ■LSC

► BACKLIGHT: This function allows you to get    a clear pictures of objects even the objects in strong backlight.

RESET    ■FACTORY

EXIT

How to use the camera LENS

1. When the SETUP menu screen is displayed, select LENS by

Using the UP and Down buttons so that the arrow indicates LENS

► DC/VIDEO: Select Auto Iris Lens.

EXPOSURE

  • Using this function, you can control screen brightness.

    ► SHUTTER: MANUAL/AUTO.

    • MANUAL

      NTSC: 1/30 ~ 1/50000, X2 ~ X30. PAL: 1/25 ~ 1/50000, X2 ~ X30.

      • FLK: Select this when you picture flicker.

    * AUTO: Select this mode to control the shutter speed automatically. Shutter speed is automatically controlled    5

Around 3,100°K.

► MANUAL: Select this to fine-tune White Balance manually.

DAY & NIGHT

  • You can display pictures in Color or Black and White.

    ► AUTO: Switched Color and B/W automatically.

    DELAY: You can select the duration time about changing the day/night mode.

    ► COLOR: The picture is always displayed in color.

    ► B/W: The picture is always displayed in B/W.

NR

  • This function reduces the background noise in a low luminance environment.

    *2DNR (noise reduction)    *3DNR

    * SMART NR (3DNR+ motion detection)

SPECIAL

  • Select a desired mode using the UP and DOWN buttons.

► CAM TITLE: If you enter a title, the title will be appear on the monitor.

► D-EFFECT

  • FREEZE: You can stop the image or reactive it.

    • MIRROR

      • MIRROR: you can flip the image horizontally.
      • V-FLIP: you can flip the image vertically.

      • ROTATE: you can rotate the image on the screen.
    • D-ZOOM

      • PIP: PIP display ON/OFF    – D-ZOOM: X2.0~X64
      • PAN&TILT: Set to change PIP position.
    • NEG.IMAGE: ON/OFF

    ► MOTION

    • SELECT: Select AREA1~AREA3.
    • BLC : GAIN: LOW,MIDDLE,HIGH

AREA: Area set (size & position).

  • HSBLC: When it is night, the camera automatically detects the light level and maintains a clear picture.

    *SELECT: AREA 1~AREA 4    *DISPLAY: select area ON/OFF

    *LEVEL: Masking level set    *MODE: ALL DAY and NIGHT

    *BLACK MASK: Mask ON/OFF

WHITE BAL.

► ATW: Select this when the color temperature is between 2400°K and 11,000°K.

► AWC→SET: To find the optimal setting for the current luminance environment in this mode, set the point the camera towards a sheet of white paper and press the SET button. If the environment changes, readjust it.

► OUTDOOR: Select this when color temperature is around

5,100°K.

► INDOOR: Select this when the color temperature is

  • SENSITIVITY: When the number is high, the detection    6

Sensitivity is increased to recognize even small movement.

  • MOTION VIEW: ON/OFF.

► PRIVACY: Hide an area you want to hide on the screen.

  • SELECT: AREA1~8    * DISPLAY: Select AREA ON/OFF
  • COLOR: 1~16 color step * DEFAULT: Factory Reset

► LANGUAGE: ENGLISH/CHINESE.

► DEFECT: CMOS correction to compensate for defects that can be occur at the low light conditions.

*LIVE DPC: Auto defect.    *LEVEL: Level of Auto defect.

*STATIC DPC: Manual defect. *LEVEL: Manual defect value.

*START: Start defect. (Close the lens to shield the light, Select the START).

*SENS-UP: Sense up value.

► RS485: This function sets up the camera communication status when controlling the camera through an external device.

► VERSION: Version of camera.

ADJUST

► SHARPNESS: Adjust the sharpness of the image.

► MONITOR: CRT monitor and LCD monitor.

  • LCD: Set GAMMA, BLUE GAIN, RED GAIN.

► OSD: TEXT COLOR & OUT LINE AN adjustable.

► LSC: Lens shading compensation.

► NTSC/PAL: Select NTSC/PAL.

RESET

► FACTORY: Resets the camera setting to the factory defaults. Language and Communication status is not initialized.

EXIT

Press the ENTER button in the EXIT menu to save the current settings and exit the MAIN SETUP menu.

* DISPLAY: Select AREA ON/OFF.    7    8

Leave a Reply